EU Safety Gate atšaukimai
Honda atšaukimai
40 aktyvūs atšaukimai
Filtruok pagal modelį:
Passenger car
The fuel pump impeller's defective molding can cause the impeller to have low density, which can lead to cracking. This can result in the impeller absorbing too much fuel, deforming, and potentially causing the fuel pump to fail. This failure can lead to the engine stalling while driving or failing to start, creating a risk of accidents and injuries to vehicle occupants.
Rizikos tipas: INJURIES
Motorcycle
Insufficient bonded area of left handle grip can cause the grip to loosen. This can result in the rider falling, increasing the risk of accidents and injuries.
Rizikos tipas: INJURIES
Passenger car
The battery cable connecting the battery to the fuse box is not fitted with a fuse. In the event of a collision, the battery cable could be damaged if it is trapped against the vehicle's body. This can lead to a short circuit and possible overheating of the battery cable, which creates a risk of fire and injury.
Rizikos tipas: FIRE, INJURIES
Passenger car
The right-hand front seat's headrest may have been bent forward. This can increase the risk of injuries in the event of an accident.
Rizikos tipas: INJURIES
Motorcycle
The fuel pump impeller may be faulty, which can prevent fuel from being delivered, risking a power cut or engine shutdown. If this happens during driving, it creates a risk of accidents and injuries.
Rizikos tipas: INJURIES
Motorcycle
The spring hook on the main stand lacks weld strength. It may break when the main stand is operated, causing the vehicle to fall over. In addition, the spring hook may come off while riding, causing the main stand to touch the ground and the vehicle to fall, increasing the risk of injury.
Rizikos tipas: INJURIES
Passenger car
Due to improper manufacturing of the belt buckle channel, the front seat belt buckles (driver or passenger side) may not lock properly. This could affect the restraining capacity of the safety-belt and increase the risk of injury in the event of an accident.
Rizikos tipas: INJURIES
Passenger car
The brake master cylinder may detach, affecting the braking performance and creating a risk of an accident.
Rizikos tipas: INJURIES
Scooter
Brake fluid may leak, reducing the vehicle's braking performance and increasing the risk of an accident.
Rizikos tipas: INJURIES
Motorcycle
An oil plug in the right crankcase cover may become detached, which can lead to engine oil leaks. This increases the risk of injury from leaking hot engine oil and the risk of an accident if leaking engine oil gets on the rear tyre. Moreover, the engine oil can leak on the hot exhaust, increasing the risk of fire.
Rizikos tipas: FIRE, INJURIES
Passenger car
The driver's seat frame may break due to continuous external stress. In the event of an accident, this can prevent the driver restraint system from functioning, increasing the risk of injury.
Rizikos tipas: INJURIES
Motorcycle
The oil core plugs situated in the crankcase cover may come out and hot engine oil may leak, causing injuries to the rider. Leaked oil may fall onto the rear tyre, causing the rider to lose control and the oil may be ignited if transmitted to the hot exhaust.
Rizikos tipas: FIRE, INJURIES
Motorcycle
The fuel injection system may malfunction, causing the fuel injection and ignition to stop working. The engine may stall while driving, creating a risk of an accident. As regards dual-clutch transmission vehicles, malfunctioning of the fuel injection program may cause the clutch to disengage, resulting in a loss of power.
Rizikos tipas: INJURIES
Motorcycle
Incorrect functioning of the ignition timing control in the engine control unit can cause the engine to stop while driving, increasing the risk of an accident.
Rizikos tipas: INJURIES
Passenger car
A communication disruption between two processing units that operate the collision mitigation braking system may cause the front wide angle camera to fail to work properly after starting the vehicle, increasing the risk of an accident.
Rizikos tipas: INJURIES
Passenger car
The drive shafts installed in the vehicles concerned were coated with a lubricant which accelerates the wearing of the protective layer covering them, making them more susceptible to damage caused by road debris. Furthermore, grit containing de-icing agents used to maintain the roads could accumulate in damaged parts of the drive shafts, increasing corrosion and the risk of breaking at high torque. Both situations increase the risk of accident/injury for passengers and other road users.
Rizikos tipas: INJURIES
Passenger car
At high speeds, the air inlet between the bonnet and the radiator grill causes vibrations in the hood. This can result in stress fractures along the bonnet latch striker and its separation from the bonnet, causing the bonnet to open. This obstructs the drivers view, increasing the risk of an accident.
Rizikos tipas: INJURIES
Motorcycle
If driven on the 1st gear and at high RPM, the surface of the resin h hose of the oil cooler may over-heat from the radiant heat of the exhaust pipe. The resin hose may crack and engine oil may leak. This may cause a fire, or the oil may adhere to the rear tyre, causing the rider to fall.
Rizikos tipas: INJURIES
Motorcycle
Due to a manufacturing error, the motorcycle may have insufficient sealant performance due to small overlap allowance with the filler neck in the cooling system of the engine. If the vehicle is used continuously in this condition, high temperature coolant may leak from the overflow tube, which could cause an accident.
Rizikos tipas: INJURIES
Motorcycle
The engine speed may decrease momentarily when quickly opening the throttle from the fully closed position to a slightly opened position. As a result, the engine could stall at the time of starting or stopping, increasing the risk of an accident.
Rizikos tipas: INJURIES
Motorcycle
Due to an error in the assembly process, the wire harness may be pinched between the pillion step and the frame body or between the luggage box and the frame body. As a result, disconnection and short circuit of the wire harness may occur, causing the engine to stall while riding and increasing the risk of an accident.
Rizikos tipas: INJURIES
Motorcycle
In the ABS (Antilock Braking System) modulator, excessive grease was applied to the O-ring of the reservoir piston due to improper management of the equipment for applying grease to components. During continued use in this condition, foreign matter adheres to the grease that has moved to the out valve, and it may become pinched in the check valve during braking, causing input pressure leak, and increasing the braking distance.
Rizikos tipas: INJURIES
Motorcycle
During the production assembly process, the left cushion connecting plate was installed with the inside and outside reversed, which may cause an excessive load to be applied to it. As a result, the plate could break, causing a sudden drop in ride height and leading to increased risk of an accident.
Rizikos tipas: INJURIES
Passenger car
Due to of incorrect programming, the seat belt occupancy sensor may be displayed incorrectly. As a result, the occupant could forget to fasten the seat belt, leading to increased risk of injury in the event of an accident.
Rizikos tipas: INJURIES
Motorcycle
Excessive grease was applied to the O-ring of the reservoir piston in the ABS (Anti-lock Braking System) modulator. As a result, foreign matter may adhere to the grease and become pinched in the check valve during braking, causing input pressure leak and increasing the braking distance.
Rizikos tipas: INJURIES
Passenger car
There may be faulty communication between various electronic units; this includes windscreen wipers, reversing cameras, lighting devices (full headlights) and window lifters.
Rizikos tipas: INJURIES
Motorcycle
Excessive grease was applied to the O-ring of the reservoir piston in the ABS (Anti-lock Braking System) modulator. As a result, foreign matter may adhere to the grease and become pinched in the check valve during braking, causing input pressure leak and increasing the braking distance.
Rizikos tipas: INJURIES
Motorcycle
The fuel filter may be clogged by zinc oxide particles, generated during the welding process of the fuel tank. This could cause the motorcycle to lose power or the engine to stall, increasing the risk of an accident.
Rizikos tipas: INJURIES
Passenger car
Liquid can accumulate in a gap in the Power Window Master Switch (PWMS) case. As a result, short circuit could occur that can generate heat and cause the PWMS and adjacent parts to overheat, increasing the risk of fire.
Rizikos tipas: FIRE
Motorcycle
The pannier installation was not fully carried out in accordance with the fitting instructions. As a result, in may become detached in motion, posing a risk to the following traffic.
Rizikos tipas: INJURIES
Motorcycle
Due to inappropriate tightening torque settings, the gear change pivot bolt may loosen when a strong up-shifting is applied. During continued use, the bolt will break and the change pedal will come off, making it impossible to change gear and thus leading to increased risk of an accident.
Rizikos tipas: INJURIES
Passenger car
Moisture can ingress into the electric sliding door and get into contact with the cables and socket couplers of the external handle. As a result, the door may be opened inadvertently while the vehicle is in motion, increasing the risk of an accident.
Rizikos tipas: INJURIES
Passenger car
The description of the front-seat passenger airbag warning light given in the manual is incorrect. This could lead to a misinterpretation by an occupant of the vehicle, increasing the risk of injury.
Rizikos tipas: INJURIES
Motorcycle
The oil pan bolts may not be tightened to the required torque during the post-production inspection which can cause them to become loose or fall out. As a result, oil contamination can spread to the rear wheel, causing the motorcycle to lose traction.
Rizikos tipas: INJURIES
Passenger car
Due to inappropriate molding conditions, the density of the resin for the low-pressure fuel pump impeller is reduced, causing it to swell and deform by the fuel. Consequently, the impeller interferes with the pump cover and makes the fuel pump inoperative. As a result the engine may stall, increasing the risk of an accident.
Rizikos tipas: INJURIES
Passenger car
Due to improper adjustment of the assembling equipment, some springs were installed in the rear seat belt retractor locking mechanisms in a bent state. As a result, the seat belt may not be locked when it is pulled out quickly, increasing the risk of injury in the event of an accident.
Rizikos tipas: INJURIES
Motorcycle
The engine connecting rods are not sufficiently strong. This may result in engine failure and a consequent loss of control over the vehicle, increasing the risk of an accident.
Rizikos tipas: INJURIES
Passenger car
A short circuit may occur in the wiring harness. Consequently, it can overheat, leading to increased risk of fire.
Rizikos tipas: FIRE
Passenger car
The airbag inflators may be defective and may create excessive internal pressure in the event of activation. As a result, the metal inflator casing may rupture, causing metal fragments to be propelled through the airbag and into the passenger compartment, injuring the vehicle occupants.
Rizikos tipas: INJURIES
Passenger car
During repeated acceleration/deceleration, the emissions control system in the diesel Engine Control Unit (ECU) is unable to prevent sulphur accumulation inside the catalyst due to lack of robustness of the engine control software. This reduces the purification performance of nitrogen oxides (NOx). Therefore, it does not satisfy the regulatory requirement for emissions level.
Rizikos tipas: ENVIRONMENT